Product Description
Flap Tracks for Cessna Aircraft
Replace worn-out tracks to prevent dangerous and expensive binding problems!
FAA-PMA flap tracks feature many improvements over the original.
- Improved material
- 20% stronger
- 6 times fatigue strength
- Greater resistance to wear, "mushrooming" and stress cracking
- Precision machined for smooth rolling action
- No pre-drilled holes for a precise, clean installation
- Replace just the track, not the entire assembly
- Cessna only lists the rib assembly for most aircraft
- Eliminates the need to drill into the fuel tank area
- Alodined then epoxy primed per MIL-PRF-23377 for corrosion protection
- Cessna aircraft models 150 thru 210
| Part Number: | 035-MC1221010-8 | |||||||||||||||||||||||||||||||||||||||||||
| Approval Basis: | FAA-PMA Approved | |||||||||||||||||||||||||||||||||||||||||||
| Replaces: |
| |||||||||||||||||||||||||||||||||||||||||||
| Aircraft Eligibility: | Click HERE for aircraft eligibility chart | |||||||||||||||||||||||||||||||||||||||||||
| Typical Lead Time: | Stock | |||||||||||||||||||||||||||||||||||||||||||
| Notes: |
Notes:
Determine if a Cessna flap track is worn beyond wear limits with the Flap Track Wear Gauge
Note: Before purchasing part number MC1221010-8 flap track for installation on a Cessna 180 or 182, verify the thickness of the currently installed flap tracks. MC1221010-8 is 0.25 thick. Some early Cessna 180 and 182 aircraft have a 0.16 thick flap track laminated on both sides for a total thickness of 0.25. If your aircraft has the thinner laminated flap tracks, part number MC1221010-8 cannot be installed. |
