Engine Baffles, Cessna 150 1971 thru 77. Complete Set

Cessna C-150 (71~77) Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

​Engine:  Continental  O-200-A

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C150-7177

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0450171, 0450209, 0450210, 0450322-2, 0450322-3, 0450502-42, 0455000-4, 0455000-11, 0455001-2, 0455001-3

Aircraft Eligibility:

Cessna 150 1971-1977 - Serial Number 15072004 and on | F15000659 and on | A15000227 and on | FA15000082 and on

Finish:

Bare or Hammertone Gray powder Coating.

Specifications:

See Above

Notes: