Engine Baffles, Cessna 177RG Cardinal (1975-78) Complete Set

Cessna C-177RG (75~78) Complete Engine Baffle Set

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine: Lycoming IO-360

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C177RG-7578

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 2055003-20, 2055008-1, 2055014-1, 2055013-1, 2055005-5, 2055015-3, 2055015-30, 2055015-20, 2055015-2, 2055004-5, 2055006-5, 2055015-15.

Aircraft Eligibility:

Cessna 1975-1978 | C-177RG S/N177RG0593 - 177RG1366 & 177RG0491

Finish:

Bare or Hammertone Gray Powder Coating.

Notes: