Engine Baffles, Piper PA-28-181 Archer II. Complete Set.

Piper PA-28-181 Archer II Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About our baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Lycoming  O-360-A4M

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Baffles available in either bare aluminum or hammertone grey powder coat.

Part Number:

035-PA28181-2     

Approval Basis:

FAA-PMA Approved

Replaces:

Piper Parts: 62233-00, 62234-00, 62383-03, 62387-09, 63092-00, 63093-00, 63605-00, 99573-00, 99577-00 & 99578-00

Aircraft Eligibility:

PA-28-181 S/N 28-8090001 through 28-8690056, 28-8690061, 28-8690062, 2890001 through 2890205 

Note: