Engine Baffles, Piper PA-32-300, Complete Set.

Piper PA-32-300 Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  PA-32-300 = Lycoming  IO-540-K1A5   

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-PA32300

Approval Basis:

FAA-PMA Approved 

Replaces:

Piper Parts: 68029-09, 68030-10, 68031-05, 68033-00, 68053-00, 68830-00, 68831-00, 68832-00, 68833-00, 68834-00, 68835-00, 99781-00

Aircraft Eligibility:

Piper PA-32-300 S/N 32-7640072 thru 32-7940290.

Finish:

Bare or Hammertone Gray powder Coating.

Notes: