Nose Landing Gear Door Hinge Upgrade, Bonanza & Baron Models. Both Doors

This kit covers the nose gear door hinge bushings for the Beech Baron & Bonanza.

Avoid unnecessary and costly repairs by installing AeroTough® GF polymer bushings. This preventative maintenance solution will ensure that you will never have the complications with seized bushings that traditional metal bushings can exhibit.

Lifetime lubricated AeroTough® bushings prevent problems:

• Eliminate anxiety about damages to the supporting structure
• Never worry about lubricating tough-to-access place
• Zero risk of corrosion between sleeve and bushing
• Be proactive: The cost to repair greatly exceeds the price of prevention. Don’t wait for disasters to occur. Make the change now!
  
  
• • An essential part of your landing gear maintenance checklist is the need for periodic lubrication of hard-to-get-at door hinge bushings. Achieving proper lubrication is challenging because access is difficult. If these bushings are not lubricated regularly, corrosion will result. This can cause the bushing and sleeve to fuse together over time, resulting in problems with the door rigging and the operation of the aircraft. This could lead to an inoperable gear door or the cracking of the gear door - a safety issue for sure and at best, an expensive repair. Our kit is insurance against the possibility of future problems.
  • The solution to this problem is AeroTough® GF polymer bushings. These non-metallic bushings can be easily installed and will provide smooth grease-free operation. AeroTough® bushings will never require lubrication. The polymer material is designed to incorporate its own lubrication. If someone doesn’t know our bushings have been fitted and decides to squirt some lubrication into the hinges, it’s no problem. Our bushings are quite happy to run in oil or grease – it’s just not necessary!

Part Number:

126-M1005

Approval Basis:

United States STC SA03852NY and SA03853NY
Transport Canada STC SA16-21 & SA16-20

Aircraft Eligibility:

Textron Beechcraft
E33, E33A, E33C, F33, F33A, F33C, G33
35-33, 35-A33, 35-B33, 35-C33, 35-C33A, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B.
36, A36, A36TC, B36TC

Typical Lead Time:

Stock

Notes:

Kit contains parts for two doors. (LH & RH Nose Gear)

Kit Contents

4 ea AN3-7A   Bolt
4 ea MBA10099 SS Sleave
4 ea MBA10098 ATGF Bushing
8 ea AN960-10A Washer
4 ea AN365-1032A Nut
1 ea 19/64" Drill Bit
1 ea 5/16" Drill Bit