Piper PA-28 Wing Tips With Landing Lights, Upswept. Set of Two RD-6000

Piper PA-28 Warrior, Cadet, Archer, Dakota and Arrow wing tips with landing lights by Knots 2U.

Our upswept wing tips with integrated landing lights are the latest generation wing tip for the Piper series. The upsweep allows the air to "wash" off of the wing with minimal drag and prevents air from disturbing the aileron. Compared to the original rounded tips these will: Increase cruise speed 1-2 mph, Improve rate of climb 40-60 ft/min, Increase stability and handling, Reduce stall speed 1-2 mph, and reduce take-off roll.

They are made of a durable fiberglass and include features such as easy to change and adjust bulbs.  Compared to the original rounded tips these will: Increase cruise speed 2-3 mph, Improve rate of climb 40-70 ft/min, Increase stability and handling, Reduce stall speed 2-3 mph, and Reduced take-off roll.

The lights will add visibility and recognition in the pattern.  For even more visibility and recognition the HID Light system can be added. HIDs produce more then 5X the light output while drawing far less amperage.  The HID lights are also waranted for as long as you own your plane!

For additional recognition you can purchase the Pulselite or MaxPulse system to add the wig wag effect.

The kit comes complete with everything necessary to install them, including wire, circuit breaker, switch, installation instructions, and Supplemental Type Certificate. (Uses existing nav or nav/strobe assembly, strobe kit not included)

Part Number:

RD-6000    

Approval Basis:

Supplemental Type Certificate No(s) SA2356NM
EASA STC No. 10028304

Replaces:

n/a

Aircraft Eligibility:

Piper  PA-28-151, PA-28-161, PA-28-181, PA-28-201, PA-28-236, PA-28R-201, PA-28R-201T, PA-28RT-201, PA-28RT-201T.

Typical Lead Time:

10-14 Days 

Typical Installation Time:

15 hours

Note: Installation times do not include painting

Finish:

White primer, ready for paint

Specifications:

Kit comes with incandescent bulbs, circuit breaker, wire & switch.  No wiring, switches, breakers etc. are included for interconnection of pulsing LED lights.

Notes:

Lights may be upgraded to LED or HID.

Replacement lenses for these tips are available here.

Hardware Kit for PA-28-151 and 161 thru S/N 2842000 Wing Tip Hardware Kit, 64 pcs. Stainless Steel Piper PA-28-151 & PA-28-161 Early Models 07-0507

Hardware kit for PA-28-161 S/N 2842001 & Up Wing Tip Hardware Kit, 36 pcs. Stainless Steel Piper PA-28-161 Late Models 07-0508

Hardware kit for PA-28-181, PA-28-201T Wing Tip Hardware Kit, 56 pcs. Stainless Steel Piper PA-28-181 & PA-28-201T. 07-0509

Hardware kit for PA-28-236, PA-28R-201, PA-28R-201T, PA-28RT-201T Wing Tip Hardware Kit, 56 pcs. Stainless Steel Piper PA-28R and PA-28-236. 07-0510

Note: Hardware kits are sold 1 kit per wing tip.