Exterior Parts (Tips, Fins, Fairings)

Cabin Door Hinge Eyebolt Set. PA-28, PA-32 & PA-34. (Set of Two) 07-EYE1

Restore solid attachment of the doors to the fuselage The eyebolts are probably the most neglected parts on the plane. They hardly ever get lubricated and due to their exposure to the elements, rust in the pivot point can prevent the door from closing...

Piper Cabin Door. Hinge Clevis Pin Set. PA-28 S/N 28-1 THRU 28-544. 07-0402

  Restore solid attachment of the doors to the fuselage Due to normal wear and lack of lube, the door hinge clevis pins should be replaced from time to time to maintain the proper operation of the doors. The set includes 2 clevis pins, 4...

Piper Cabin Door. Hinge Clevis Pin Set. PA-28, PA-32 & PA-34. 07-ADSCL

  Restore solid attachment of the doors to the fuselage Due to normal wear and lack of lube, the door hinge clevis pins should be replaced from time to time to maintain the proper operation of the doors. The set includes 2 clevis pins, 4...

Piper Door Latch Clevis Pin Kit ADS-LCP

Restore solid latching of the doors to the fuselage Due to normal wear and lack of lube on the earlier models of the PA-28, 32 and 34 which have the 1/8 inch diameter clevis pin, the door latch clevis pin should be replaced from time to time to...

Ultra Wing Walk Compound, Rubber. ADSUWW

A Revolutionary New Wing Walk Coating. This phenomenal new wing walk coating reduces the chance of slipping when climbing up on the wing. Unlike the mundane wing walk coating found on most aircraft, ULTRA WING WALK is a fast-drying polyurethane-based...

Piper Wing Root Seal. PA-28, PA-32, PA-34, PA-38 & PA-44. (Kit for One Wing). Piper Part 65773-00, 65773-000, 187-526, 65773-02, 65773-002

FAA-PMA Approved Replacement. Made from a superior compound which is softer than the OEM for easier installation. Part Number: K65773-00  Approval Basis: FAA-PMA Approved Replaces: Piper 65773-00, 65773-000, 187-526,...

Fairing Assembly-Main Gear. Piper PA-28 and PA-32 Models. 63338-00, 63338-000

Our strut fairing is laser cut for a perfect fit every time.  It comes primed and ready for paint and includes new stainless hardware and rubber moulding.  Part is FAA-PMA approved and costs considerably less than an OEM replacement.  ...

Isham Wing Tip Landing Light Lens. 1558-010

Drill bits specially angled for drilling plastic are available here Drill Bits Part Number: 1558-010 Approval Basis: FAA-PMA Approved Replaces: Modification Part Aircraft Eligibility: Piper PA-28 and PA-32 models with Isham...

Piper Wing Bolt Cover. Piper 63942-00 and 63942-01

  Part Number: GF63942-00 LeftGF63942-01 Right     Approval Basis: FAA-PMA Approved Replaces: Piper Part 63942-00, 63942-000, 63942-01, 63942-001.  Aircraft Eligibility: Piper PA-28, PA-32,...

2 Pc Dorsal Fin STC Kit. Piper PA-28 Early Models. ISH28006

This kit is designed for early Piper PA-28 models. It replaces the small dorsal with the larger 2 pc dorsal found on the later model Pipers.  The forward section is riveted to the fuselage while the aft section is installed...

Piper Dorsal Fin - Forward. Piper PA-28 and PA-32 Models. RD-0096-00

  Part Number: RD-0096-00     Approval Basis: FAA-PMA Approved Replaces: Piper Part 99621-00, 99621-000, 99621-02, 99621-002. Aircraft Eligibility: Piper PA-28-140 S/N 28-7225001 and up, PA-28-180 S/N...

Piper Dorsal Fairing. Piper 63517-00

  Part Number: GF63517-00      Approval Basis: FAA-PMA Approved Replaces: Piper Part  63517-00, 63517-000 Aircraft Eligibility: Piper PA28-140 S/N...

Piper Dorsal Fin - Aft. Piper PA-28 and PA-32 Models. RD-0095-00

  Part Number: RD-0095-00     Approval Basis: FAA-PMA Approved Replaces: Piper Part 99619-00, 99619-000, 99619-02, 99619-002. 99619-04, 99619-004, 99619-07, 99619-007, 99619-008. Aircraft Eligibility: ...

Piper Vertical Fin Tip. No Light Mount, Fiberglass. Early PA-28 Models (Thru 1971). 28FINII

Piper PA-28 Cherokee vertical fin cap fairing by Knots 2U. Replace Piper part 63514-06. Part Number: 28FINII  Approval Basis: FAA-PMA Approved Replaces: Piper Part 63514-06 Aircraft Eligibility: Piper Models:PA28-140 S/N...

Piper Vertical Fin Tip. 3.75" Light Mount, Fiberglass. Early PA-28 Models (Thru 1971). Piper 63514-06, 63514-006

Piper PA-28 Cherokee vertical fin cap fairing by Knots 2U. Replaces Piper part 63514-06 and 63514-006. Part Number: GF63514-00 Approval Basis: FAA-PMA Approved Replaces: Piper Part 63514-06, 63514-006 Aircraft Eligibility:...

Piper Vertical Fin Tip. 2.6" Light Mount. Fiberglass Early PA-28 Models (Thru 1971). 28BCNII

Piper PA-28 vertical fin cap fairing by Knots 2U. Replaces Piper part 96713-02 and 96713-002. Part Number: 28BCNII  Approval Basis: FAA-PMA Approved Replaces: Piper Part 96713-02, 96713-002 Aircraft Eligibility: ...

Fiberglass Vertical Fin Tip. No Light Mount. PA-28 Models (1972 thru 73 Models). 28FINIII

Piper PA-28 Cherokee vertical fin cap fairing by Knots 2U. Replace Piper part 96709-00. Part Number: 28FINIII  Approval Basis: FAA-PMA Approved Replaces: Piper Part 96709-00 Aircraft Eligibility: Piper Models:PA-28-140...

Piper Vertical Fin Tip. 2.6" Light Mount. Early PA-28 Models (1972 thru 73 Models). 96709-00, 96709-000

Piper PA-28 Cherokee vertical fin cap fairing by Knots 2U. Replace Piper part 96709-00. Part Number: 28BCNIII  Approval Basis: FAA-PMA Approved Replaces: Piper Part 96709-00, 96709-000 Aircraft Eligibility: Piper...

Fiberglass Vertical Fin Tip. No Light. PA-28 & PA-32 Models. 38222-00, 38222-000

Piper PA-28 and PA-32 vertical fin cap fairing by Knots 2U. Replaces Piper part 38222-000. Part Number: 2832FIN    Approval Basis: FAA-PMA Approved Replaces: Piper Part 38222-00, 38222-000 Aircraft Eligibility: ...

Vertical Fin Tip. 3.75" Light Mount. PA-28 & PA-32 Models. Piper 65345-03

Piper PA-28 and PA-32 vertical fin cap fairing by Knots 2U. Replaces Piper part 65345-00, 65345-000, 65345-003, 65345-800, 65345-803. Part Number: GF65345-03    Approval Basis: FAA-PMA...

Piper Vertical Fin Tip. 2.6" Light Mount, Fiberglass. PA-28 & PA-32 Models. 2832BCN

Piper PA-28 and PA-32 vertical fin cap fairing by Knots 2U. Replaces Piper part 99032-02, 99032-002, 99035-00, 99035-000, 99035-03, 99035-003. Part Number: 2832BCN    Approval Basis: FAA-PMA Approved Replaces: Piper...

Piper PA-28 Upswept Stabilator Tip. Set of Two STC SA520CH

The original AMR&D Art Mattson Stabilator Tips for the Piper Cherokee.   The design is based on the drag reducing properties of the Hoerner Style wing tip, which was modified to maintain equal tip authority whether it was with up or down...

Fiberglass Stabilator Tip. Piper PA-28 Models. 65300-00, 65300-000

Piper PA-28 Arrow and Pathfinder stabilator Tip by Knots 2U. Replaces Piper part 65300-00 and 65300-000 Part Number: K2U65300-00  Approval Basis: FAA-PMA Approved Replaces: Piper Part 65300-00, 65300-000 Aircraft...

Piper PA-28, PA-32, and PA-44 Stabilator Tip. 63584-00, 63584-000, 63584-06, 63584-006, 63584-07, 63584-007, 63584-10, 63584-010, 63584-14, 63584-014, 63589-00, 63589-000, 488-601

  Part Number: RD-0094-00     Approval Basis: FAA-PMA Approved Replaces: Piper Part 63584-00, 63584-000, 63584-06, 63584-006, 63584-07, 63584-007, 63584-10,...

Piper Tail Cone, Fiberglass. Piper PA-28 & PA-32 Models.

  Part Number: RD-0099-00     Approval Basis: FAA-PMA Approved Replaces: Piper Part: Upper: 62629-03, 62629-003, 65715-03, 65715-003, 66822-08, 66822-008, 66822-10, 66822-010, 66822-06, 66822-006. Lower:...

Stainless Steel Exterior Trim Screw Kit. Piper PA-28-140, PA-28-150, PA-28-160, PA-28-180, PA-28-235 – 540 Pcs. 07-P201

Piper PA-28 Cherokee stainless steel hardware kit from Knots 2U. The Knots 2U stainless steel hardware kit is the most complete on the market. a. Kit includes exterior non-structural screws only. b. Kit includes an extra screw allowance for...

Stainless Steel Wing Tank Screw Kit. Piper PA-28-140, PA-28-150, PA-28-151, PA-28-160, PA-28-161, PA-28-180, PA-28-181, PA-28-201, PA-28R-180, PA-28R-200, PA-28-235, PA-28-235B - 07-0055

  Wing Tank Screw Kit (Inboard tanks only, one kit required per tank) Part Number: 07-0055 Approval Basis: N/A Replaces: N/A Aircraft Eligibility: Piper PA-28-140, PA-28-150, PA-28-151, PA-28-160, PA-28-161, PA-28-180,...

Piper Bogi-Bar Tow Bars

Bogi Bars are the most reliable way to tow your aircraft by hand, and since they're made in America, it's only appropriate that they come with a lifetime guarantee (for intended use incidents only).  They are made of durable steel and finished...

PROP GUARD Anti-Abrasion Boot

Anti-abrasion boot for your metal propellerIt is more economical to protect your propeller blades with PROP GUARD than to continually file, dress, paint and balance your blades until they have to be replaced. Water, sand,...