Exterior Parts (Tips, Fins & Fairings)

Cabin Door Hinge Eyebolt Set. PA-28, PA-32 & PA-34. (Set of Two) 07-EYE1

Restore solid attachment of the doors to the fuselage The eyebolts are probably the most neglected parts on the plane. They hardly ever get lubricated and due to their exposure to the elements,...

Piper PA-34 Seneca Nose Bowl (Carbon Fiber). GF67998

Our nose bowl assembly is made from carbon fiber for increased strength and reduced weight. Part Number:

Piper Cabin Door. Hinge Clevis Pin Set. PA-28 S/N 28-1 THRU 28-544. 07-0402

  Restore solid attachment of the doors to the fuselage Due to normal wear and lack of lube, the door hinge clevis pins should be replaced from time to time to maintain the proper operation...

Piper Cabin Door. Hinge Clevis Pin Set. PA-28, PA-32 & PA-34.

  Restore solid attachment of the doors to the fuselage Due to normal wear and lack of lube, the door hinge clevis pins should be replaced from time to time to maintain the proper operation of the...

Piper Door Latch Clevis Pin Kit ADS-LCP

Restore solid latching of the doors to the fuselage Due to normal wear and lack of lube on the earlier models of the PA-28, 32 and 34 which have the 1/8 inch diameter clevis pin, the door...

Ultra Wing Walk Compound, Rubber. ADSUWW

A Revolutionary New Wing Walk Coating. This phenomenal new wing walk coating reduces the chance of slipping when climbing up on the wing. Unlike the mundane wing walk coating found on most...

Piper Wing Root Seal. PA-28, PA-32, PA-34, PA-38 & PA-44. (Kit for One Wing). Piper Part 65773-00, 65773-000, 187-526, 65773-02, 65773-002

FAA-PMA Approved Replacement. Made from a superior compound which is softer than the OEM for easier installation. Part Number:

Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1

Part Number: LSM-200-701-1     

Piper Wing Bolt Cover. Piper 63942-00 and 63942-01

  Part Number: GF63942-00 Left<

Fiberglass Rudder Tip. Piper PA-34 Models. GF 95907-00

Piper Seneca PA-34 rudder tip cap. Replace Piper part 95907-00 or 95907-000. Part Number:

Fiberglass Stabilator Tip (RH or LH). Piper PA-34 Models. GF 95620-07

Piper Seneca PA-34 fiberglass stabilator tip by Knots 2U. Replace Piper part 95620-00, 95620-000, 95620-07, 95620-007 Part Number:

Piper Cover Assembly, Bumper, 37939-003

    

Piper 758-738, PA-32 and PA-34 Bumper.

  Part Number:09 &

Fiberglass Tail Cone. Piper PA-34 Seneca. 96338-04, 96338-08

  Part Number: GF96338-04 Upper

Stainless Steel Exterior Trim Hardware Kit Fits Piper PA-34 – 1650 Pcs. 07-P212

Piper PA-34 Seneca stainless steel hardware kit from Knots 2U. The Knots 2U stainless steel hardware kit is the most complete on the market. a. Kit includes exterior non-structural screws only. b...

PROP GUARD Anti-Abrasion Boot

Anti-abrasion boot for your metal propellerIt is more economical to protect your propeller blades with PROP GUARD than to continually file, dress, paint and balance your blades until they have to...

Piper PA-34 thru 1976 Set of Two Locks. Forward and Rear Cabin Doors

  Part Number: