Cessna Flap Roller Kit FLP-KT-3

Kit contains:

Basic flap roller kit or an upgrade kit to address flap arm wear problems. Each flap roller kit contains enough components for one aircraft.

Basic kits include: rollers, bushings, shims, spacers (where required), and a copy of SEB95-3 (as applicable). The basic flap roller kits do not include the wear washers as required by Cessna SEB95-3 Rev.1 for the forward locations.

Upgrade kits include: rollers, bushings, shims, spacers where required, MCSK100 Flap Service Kits, wear washers, a copy of SEB95-3 Rev 1, and hardware (nuts, bolts, washers).

• Part numbers for the upgrade kits end in "U"
• SEB95-3 Rev 1 is not applicable to 172R,S, 182S,T, T182T, 206H, T206H, 208, 336 and 337 aircraft
• Flap upgrade kits contain nuts, bolts and washers for several aircraft models. The installer must determine the correct nut, bolt and washer combination for each installation.
  
  

Part Number:

035-FLP-KT-3

Approval Basis:

STC SA01074WI, EASA.IM.A.S.01207

Aircraft Eligibility: