Performance Modifications

Flap / Flap-Fuselage / Stabilator Gap Seal Kit. Piper Saratoga Models.32TGS

The KNOTS 2U gap seal kit is the most complete on the market, as well as the most popular.  It not onl

Flap Gap Seal Kit. Piper PA-32 Models. 32FLAPT

Flap seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plas

Stabilator Gap Seal Kit. Piper PA-32 Saratoga Models. 32STABT

The Stabilator Gap Seal closes the gap between the trim tab and the stabilator.  It has proven very effective for additional speed and stabilator authority.  It is available separate or included...

Flap/Fuselage Gap Seal Kit. Piper PA-32 Models. 32FFT

  The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius

Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models.

The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag...

Flap Hinge Fairing Kit. Piper PA-32 Models. 32HF

Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2

Gear Lobe Fairing Kit. Piper PA-32 Models, 32LOB

The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains.  Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite she

Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1

Part Number: LSM-200-701-1     

Vortex Generator Kit, Piper Saratoga Models

Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by...