sku: 34FLAP Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP MSRP: Was: Now: $583.20 Add to Cart sku: 34AILH Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL MSRP: Was: Now: $467.78 Add to Cart sku: 34FF Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF MSRP: Was: Now: $131.00 Add to Cart sku: 28WRKIT Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. MSRP: Was: Now: $478.88 Choose Options sku: 34HF Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF MSRP: Was: Now: $757.78 Add to Cart sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: 34AILH Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL MSRP: Was: Now: $467.78 Add to Cart sku: 34FF Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF MSRP: Was: Now: $131.00 Add to Cart sku: 28WRKIT Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. MSRP: Was: Now: $478.88 Choose Options sku: 34HF Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF MSRP: Was: Now: $757.78 Add to Cart sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: 34FF Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF MSRP: Was: Now: $131.00 Add to Cart sku: 28WRKIT Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. MSRP: Was: Now: $478.88 Choose Options sku: 34HF Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF MSRP: Was: Now: $757.78 Add to Cart sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: 28WRKIT Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. MSRP: Was: Now: $478.88 Choose Options sku: 34HF Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF MSRP: Was: Now: $757.78 Add to Cart sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: 34HF Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF MSRP: Was: Now: $757.78 Add to Cart sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: 34LOB Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB MSRP: Was: Now: $717.12 Add to Cart sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: LSM-200-701-1 Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 MSRP: Was: Now: $265.20 Add to Cart sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: VGKITPA34 Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models MSRP: Was: Now: $2,145.00 Choose Options sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
sku: VGKITPA34200T Vortex Generator Kit, Piper PA-34-200T Models MSRP: Was: Now: $2,145.00 Choose Options Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Flap Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FLAP The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $583.20 Add to Cart Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to... MSRP: Was: Now: $467.78 Add to Cart Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage. It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction. It is available separately... MSRP: Was: Now: $131.00 Add to Cart Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models. The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner... MSRP: Was: Now: $478.88 Choose Options Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"... MSRP: Was: Now: $757.78 Add to Cart Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Gear Lobe Fairing Kit. Piper PA-34 Models, 34LOB The Knots 2U Gear Lobe Fairing smoothes the air from behind the retracted mains. Depending on aircraft model, speed increases are from 3-5 mph. They are made of a composite shell, filled with a "closed cell" urethane foam to keep them rigid in... MSRP: Was: Now: $717.12 Add to Cart Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Hub Cap W/Access Door. 6" Wheel (Set of Two) LSM-200-701-1 Part Number: LSM-200-701-1 Approval Basis: Supplemental Type Certificate No(s) SA01224AT Replaces: n/a Aircraft Eligibility: Bonanza 33, 35, 36 Series, Beech 19, 23, 24, 58 SeriesCessna C-150,... MSRP: Was: Now: $265.20 Add to Cart Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected × OK
Vortex Generator Kit, Piper PA-34-200 / PA-34-220T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected
Vortex Generator Kit, Piper PA-34-200T Models Micro Vortex Generators are small aluminum blades placed in a spanwise line aft of the leading edge of the wing and tail surfaces. They control airflow over the upper surface of the wing by creating vortices that energize the boundary layer. This... MSRP: Was: Now: $2,145.00 Choose Options Compare Selected
