Flap Gap Seal Kit. Piper PA-28 Models. 28FLAPT

Flap seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Flap Seals add 2-3 mph in cruise...

Flap Gap Seal Kit. Piper PA-28 Models. 28FLAPH

Flap seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Flap Seals add 2-3 mph in cruise...

Aileron Gap Seal Kit. Piper PA-34-200 Models. 34AIL

  The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Aircraft respond well to...

Aileron Gap Seal Kit. Piper PA-32 Models. 32AILH

Aileron seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Flap Seals add 2-3 mph...

Aileron Gap Seal Kit. Piper PA-28 Models. 28AILT

Aileron seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Flap Seals add 2-3 mph in...

Aileron Gap Seal Kit. Piper PA-28 Models. 28AILH

Aileron seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion. Flap Seals add 2-3 mph...

Flap / Fuselage Gap Seal Kit. Piper PA-34-200 / PA-34-200T / PA-34-220T Models. 34FF

The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction.  It is available separately...

Stabilator Gap Seal Kit. Piper PA-32 Saratoga Models. 32STABT

The Stabilator Gap Seal closes the gap between the trim tab and the stabilator.  It has proven very effective for additional speed and stabilator authority.  It is available separate or included in the complete gap seal kit. Part Number ...

Stabilator Gap Seal Kit. Piper PA-32 Models. 32STABH

The Stabilator Gap Seal closes the gap between the trim tab and the stabilator.  It has proven very effective for additional speed and stabilator authority.  It is available separate or included in the complete gap seal kit. Part Number ...

Stabilator Gap Seal Kit. Piper PA-28 Models. 28STABT

The Stabilator Gap Seal closes the gap between the trim tab and the stabilator.  It has proven very effective for additional speed and stabilator authority.  It is available separate or included in the complete gap seal kit. Part Number ...

Stabilator Gap Seal Kit. Piper PA-28 Models. 28STABH

  The Stabilator Gap Seal closes the gap between the trim tab and the stabilator.  It has proven very effective for additional speed and stabilator authority.  It is available separate or included in the complete gap seal kit. Part...

Flap/Fuselage Gap Seal Kit. Piper PA-32 Models. 32FFT

  The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction.  It is available separately...

Flap/Fuselage Gap Seal Kit. Piper PA-32 Models. 32FFH

  The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction.  It is available separately...

Flap/Fuselage Gap Seal Kit. Piper PA-28 Models. 28FFH

  The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction.  It is available separately...

Flap/Fuselage Gap Seal Kit. Piper PA-28 Models. 28FFT

  The Flap/Fuselage Gap seal fills the gap between the inboard edge of the flap and the fuselage.  It incorporates a radius at the trailing edge to relieve the vortex created at the 90 degree junction.  It is available separately...

Rudder Gap Seal Kit. Piper Comanche PA-24-400, PA-30, PA-39 Models. 30RS

The Rudder Gap Seal is very beneficial to the Single and Twin Comanches. Originally introduced for the Twin Comanche by Piper in 1971 to increase rudder authority and lower Vmc on twins, KNOTS 2U has improved the design and made it available for all...

Rudder Gap Seal Kit. Piper Comanche PA-24 Models. 24RS

The Rudder Gap Seal is very beneficial to the Single and Twin Comanches. Originally introduced for the Twin Comanche by Piper in 1971 to increase rudder authority and lower Vmc on twins, KNOTS 2U has improved the design and made it available for all...

Wing Root Fairing Kit. Piper PA-28, PA-32 and PA-34 Models.

The Knots 2U Wing Root Fairing Kit is one of our most popular modifications for Piper Aircraft. By smoothing the sharp junction at the leading edge of the wing, where it meets the fuselage, drag is reduced and the air over the wing is cleaner...

Wing Root Fairing Kit. Piper Twin Comanche PA-30 & PA-39 Models. 30WR

The Comanche wing root fairing has long been one of our most popular mods. Originally conceived by Piper for the sleek Comanche 400. It will add 2 mph in cruise speed as well as 50 ft/min in climb. Low speed handling is also noticeably improved...

Wing Root Fairing Kit. Piper Comanche PA-24 Models. 24WR

The Comanche wing root fairing has long been one of our most popular mods. Originally conceived by Piper for the sleek Comanche 400. It will add 2 mph in cruise speed as well as 50 ft/min in climb. Low speed handling is also noticeably improved...

Wing Fillet Kit. Piper Twin Comanche PA-30, PA-39 Models. 30WF

The Wing Fillet was originally developed to help take the common "slam dunk" out of the Comanche landings. By smoothing the vortices coming from the flap-fuselage junction, the air over the stabilator is less disturbed giving it more authority at...

Wing Fillet Kit. Piper Comanche PA-24 Models. 24WF

The Wing Fillet was originally developed to help take the common "slam dunk" out of the Comanche landings. By smoothing the vortices coming from the flap-fuselage junction, the air over the stabilator is less disturbed giving it more authority at...

3M 471 Tape, Black. 1" X 36 Yards

Item: 3M 471 TapeWidth: 1" WideThickness:Roll Length: 36 yard (108 ft)Color: BlackOptimal Application Temp: 50°F to 80°F Use to protect edges of windows from nicks during installation, Also used to create window gaskets where Rubber U-Channel is...

6-32 X 3/8" AN507C632R6 MS24693C26 Machine Screw

Industry Standards/Certification AN507 Weight 0.0014 lb Alternate Part Number Possible NSN 5305-00-958-2918 NIIN 00-958-2918 Part (unpuctuated) ...

Gap Seal Anti-Chafe Tape. 3/4" wide, 54'. 06-GSTAPE

This anti-chafe tape is used as a replacement for worn tape on aluminum gap seals. It's 5 mills thick and has an acrylic adhesive backing. It's 3/4" wide and 54 feet long, more than enough for an entire plane. 

6 X 1/2 Sheet Metal Screw. Stainless Steel Truss Head. Phillips A Point

Knots 2U stocks the most common hardware sizes and packages them in convenient re-sealable packages. Perfect for storing in your tool box or plane. All of our hardware is aviation grade and can be provided with manufacturers certificates of conformity...

6-32 X 7/16" AN507C632R7 MS24693C27 Machine Screw

Head Angle 100° Industry Standards/Certification AN507 Weight 0.0017 lb Alternate Part Number AN507C632R7 Part (unpuctuated) MS24693C27 Country of...

Bag of Rags. Two Pounds, Lint Free 100% Cotton Rags. 06-1000

White T-Shirt Rags. Great for around the shop. These are lint free making them perfect for polishing or waxing projects.  Ultra absorbant for cleaning up small spills. The re-sealable bag makes them easy to stow in the airplane or the tool box...

Moulding, Wing Root 6', Piper 475-159

PACKAGED 6 FEET PER ROLL. TWO ROLLS REQUIRED FOR EACH WING. Part Number: 475-159     Approval Basis: Genuine Piper Part Replaces: Piper 475-159, 20666-02, 20666-002 Aircraft...

Wing Root Seal, Lower, Beechcraft. 10' Section

  Lower Wing Root Seals, Beechcraft, Black (One kit good for one wing) Part Number: BAT-8850    Approval Basis: N/A Replaces: N/A Aircraft Eligibility: Beech 33/35/36/95/55/56/58 Typical Lead Time: Stock ...

Piper Wing Root Seal. PA-28, PA-32, PA-34, PA-38 & PA-44. (Kit for One Wing). Piper Part 65773-00, 65773-000, 187-526, 65773-02, 65773-002

FAA-PMA Approved Replacement. Made from a superior compound which is softer than the OEM for easier installation. Part Number: K65773-00  Approval Basis: FAA-PMA Approved Replaces: Piper 65773-00, 65773-000, 187-526,...

Flap Hinge Fairing Kit. Piper PA-34 Seneca Models. 34HF

Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"...

Flap Hinge Fairing Kit. Piper PA-32 Models. 32HF

Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"...

Flap Hinge Fairing Kit. Piper PA-28 Models. 28HF

Flap Hinge Fairings reduce drag by smoothing the airflow over the forward facing u-channel and flap attachment bolts. These will add 1-2 mph in cruise speed. Some large bulky variations on the market today use the "if it looks good it must be good"...

7512-24 Lamp, Navigation Light

General Characteristics  Primary Application Aircraft - Navigation Design Volts 24/28 Design Watts 26 Base Type S. C. Bayonet Average Life 300 hrs Equivalent & Interchangeable Part Numbers: Whelen Engineering Part Number:W1290-24...

6 X 5/8 Sheet Metal Screw. Stainless Steel Truss Head. Phillips A Point

Knots 2U stocks the most common hardware sizes and packages them in convenient re-sealable packages. Perfect for storing in your tool box or plane. All of our hardware is aviation grade and can be provided with manufacturers certificates of conformity...